Bearings And Oil Seals; Locking Ring - Yamaha FZ-16 Service Manual

IMPORTANT INFORMATION

BEARINGS AND OIL SEALS

Assemble the bearings and oil seals
so that the mark of the manufacturer or the numbers
are visible. When installing oil seals "1",
lubricate the edges of oil seals with a
thin layer of grease lithium soap base. In the
bearings, apply oil, if requested.
PREACAUCIÓN
Do not turn the bearing with compressed air, and
this will damage the surfaces

LOCKING RING

Before joining, check carefully
All sealing rings and replace those
are damaged or twisted. Always replace
sealing rings piston pin, after
a use. When installing a sealing ring "1",
make sure the sharp corners "2" are
placed on the opposite side "3" to the force received
by ring closure.
1-4