Inspection Of Forks Changes; Inspection Of Change Drum; Inspection Of Transmission - Yamaha FZ-16 Service Manual

INSPECTION OF FORKS
CHANGES
The following procedure applies to all
changes forks.
1.
Check:
Cam pin of the yoke of change "1"
l
Clips shift fork "2"
l
Curves / damage / stretch marks / wear Replace
the fork of the changes.
2.
Check:
Barra fork guide changes
l
Guide bar Roll the shift fork
on a flat surface.
Replace curves.
WARNING
Do not attempt to straighten a guide bar
bent shift fork.
3.
Check:
Fork movement changes
l
(Moving along the guide bar
of the shift fork)
Replace harsh fork movement
changes and fork guide bar
changes as a whole.

INSPECTION OF CHANGE DRUM

1.
Check:
Surcos changes in the drum
l
Damage / scratches / wear Replace
drum changes.
Segment of the drum
Damage / wear Replace the
l
the cHANGES.
Bearing drum changes
Damage / pitting Replace
l
the cHANGES.

INSPECTION OF TRANSMISSION

1.
Measure:
Deformation of the shaft
l
(With a centering device and the indicator
cover of "1")
Replace specification outside the shaft
principal.
Shaft limit deformation
0.03 mm
2.
Measure:
Deformation of the coupling pin
l
(With a centering device and the indicator
cover of "1")
Replace specification outside the shaft
traction.
Shaft limit deformation
Traction
0.03 mm
5-64
TRANSMISSION
change "1"
drum
"2"
drum
main
main