Electrical System - Yamaha FZ-16 Service Manual

ELECTRICAL
CHECKING AND CHARGING THE BATTERY
See "Components
ELECTRIC "on page 7-34
FUSE INSPECTION
See "Components
ELECTRIC "on page 7-34
CHANGE THE BULB FAROLA
The following procedure applies to the
light bulb dipped and main beam.
1. Remove:
•Side cover "1"
1
2. Disconnect:
•Connect the turn signal indicator "1"
from the end.
1
3. Remove:
• Screw the lamp "1" from the end.
• Adjustment screw light "2".
1
2
3-22

ELECTRICAL SYSTEM

4. Remove:
• Lamp "1" lamp holder "2"
1
5. Remove:
•
Lamp bulb cover "1"
•Lamp bulb holder "2"
2
1
6. Lamp bulb holder "2"
•Lamp bulb "1"
WARNING
Since the lamp bulb may be
extremely hot, keep products
flammable and hands away from the bulb
until it has cooled.
2
1