Bearing Retainer Assembly; Crankcase Assembly - Yamaha FZ-16 Service Manual

Replace harsh movement.
•
Oil Seals
Damage / wear Replace.

BEARING RETAINER ASSEMBLY

1.
Install:
•
Bearing retainer "1"
NOTE:
•
Install the bearing retainer "1" with the
marked "OUT" "to" out.
•
Apply a locking agent (LOCTITE) to
screw threads of the retainer
bearing.
Bearing retainer screw
7 Nm (0.7 m · kg, 5.1 ft · lb)
T.
LOCTITE
R.
to
1

CRANKCASE ASSEMBLY

1.
Thoroughly clean all surfaces
contact seal and the crankcase.
2.
Apply:
•
Sealant
(On the contact surfaces of the housing)
Yamaha Adhesive No. 1215
NOTE:
Do not allow product to come in contact
with the oil passage.
3.
Install:
•
Housing right
NOTE:
Rotate the drum segment changes "1" to the
position shown in the illustration. In this
position, the teeth of the drum segment
changes do not touch the crankcase for the
crankcase assembly.
4.
Install:
•
Crankcase screws
Crankcase screws
10 Nm (1.0 m · kg, 7.2 ft · lb)
T.
R.
NOTE:
Tighten each screw 1/4 turn at a time
stages and in the correct sequence as shown.
• M6 × 70 mm, "7-9", "11"
• M6 × 55 mm, "14", "15"
• M6 × 45 mm, "1-5", "10"
A
5
4
3.13
B
Casing left
A.
Housing right
B.
5-57
CARTER
1
7
1.6
8
9
2.12
10
11
14
15