Configure The Secure Router 3120; Configure The Secure Router 1004 Series At Site 2 - Avaya 1000 Series Configuration Manual

/* Bcmin consistent with minimum possible bundle
bandwidth of two T1s */
SR/configure/interface/bundle/fr/pvc> switch 16 toRouter
/* switch between wan1:16 and toRouter:16 established
*/
SR/configure/interface/bundle/fr> exit

Configure the Secure Router 3120

SR/configure> int bundle toSR1004
SR/configure/interface/bundle> link ct3 1 1-4
SR/configure/interface/bundle> description "6Mbps MFR
to SR1004"
SR/configure/interface/bundle> encap fr
SR/configure/interface/bundle> fr
SR/configure/interface/bundle/fr> intf_type nni
SR/configure/interface/bundle/fr> mfr class C 2
SR/configure/interface/bundle/fr> lmi ansi
SR/configure/interface/bundle/fr/lmi> keepalive 10
SR/configure/interface/bundle/fr/lmi> exit
SR/configure/interface/bundle/fr> pvc 16
SR/configure/interface/bundle/fr/pvc> shaping cir
6144000 bcmax 6144000 bcmin 3072000
SR/configure/interface/bundle/fr/pvc> exit
SR/configure/interface/bundle/fr> exit 2
A Secure Router 1004 at Site 2 serves as the Frame Relay termination point, connecting the
Site 2 IP network to the SR3120. This MFR bundle utilizes 2 T1 links for an approximate 3 Mb/
s bandwidth. Since it is the Frame Relay terminating point and is defined as a DTE frame relay
interface, an IP address is assigned to the WAN bundle.

Configure the Secure Router 1004 Series at Site 2

SR/configure> int bundle to1004
SR/configure/interface/bundle> link t1 1-2
SR/configure/interface/bundle> description "3 Mbps to
1004"
SR/configure/interface/bundle> encap fr
SR/configure/interface/bundle> fr
SR/configure/interface/bundle/fr> intf_type dte /* this
is default */
SR/configure/interface/bundle/fr> mfr class A /* this is
default */
SR/configure/interface/bundle/fr> lmi ansi
SR/configure/interface/bundle/fr/lmi> keepalive 10
SR/configure/interface/bundle/fr/lmi> exit
SR/configure/interface/bundle/fr> pvc 31
/* pvc's default cir set to 3072000 bps */
SR/configure/interface/bundle/fr/pvc> ip addr 10.0.2.1
255.255.255.252
SR/configure/interface/bundle/fr/pvc> enable
SR/configure/interface/bundle/fr/pvc> exit
Avaya Secure Router 1000 Series Configuration Guide
Configure the Secure Router 3120
December 2010 105