Avaya 1000 Series Configuration Manual page 38

IP MULTIPLEXING
Figure 1: IP Multiplexing Auto-Configuration
The effect of auto-configuration is that the two Secure Routers exchange Ethernet IP
addressing and subnet information as well as configured source forwarding destinations.
Based on this information, Secure Router A would install the following routes:
• A 32-bit host route to the Secure Router B Ethernet address: 192.168.0.5
255.255.255.255 wan 1
• A 30-bit network route to the Secure Router B Ethernet subnet: 192.168.0.4
255.255.255.252 wan 1
• A 32-bit host route to router 2: 192.168.0.6 255.255.255.255 wan 1
The two Secure Routers do not exchange information on manually configured IP routes, nor
do they exchange information on any routes learned through auto-configuration with other
Secure Routers.
38 Avaya Secure Router 1000 Series Configuration Guide December 2010