Announcing Ospf Routes To Bgp - Avaya 1000 Series Configuration Manual

Avaya1/configure> router bgp 100
Avaya1/configure/router/bgp 100> redistribute connected
Examine the bgp table of 3rdPartyRouter to see Avaya1 has announced any routes.
3rdPartyRouter>show ip bgp
3rdPartyRouter has two routes which are announced by 30.30.30.1 ( Avaya1). 100.1.1.0/24 is
the Ethernet interface connected route and 30.30.30.0/24 is the wan bundle interface route.
Pull back the routes 30.30.30.0 and 100.1.1.0 announced to 3rdPartyRouter by doing a no
redistribute connected on Avaya1.
Avaya1/config term>router bgp 100
Avaya1/config term/router bgp 100>no redistribute connected
Examine the bgp table of Avaya2 to see whether we have any routes.
3rdPartyRouter>show ip bgp

Announcing OSPF routes to BGP

Avaya1> show ip bgp summary
Avaya1 has an EBGP session with 3rdPartyRouter in ESTABLISHED state.
Configure OSPF between Avaya1 and Avaya3 in OSPF area 0.
Avaya1/configure> router routerid 100.1.1.3
Avaya1/configure> router ospf
Avaya1/configure/router/ospf> int ethernet1 area 0
Avaya Secure Router 1000 Series Configuration Guide
Configuring Advertising Routes to BGP
December 2010 309