Step 15: Enable Snmp On The Networks1 Router; Step 16: Display Snmp Communities; Step 17: Repeat Steps 1 - 16 With Suitable Modifications On Networks2 Prior To Managing Networks1 From The Networks2 Lan Side; Step 19: When The Snmp Manager Starts Managing Networks1 From The Networks2 Lan, Display The Ike And Ipsec Sa Tables - Avaya 1000 Series Configuration Manual

IPSec EXAMPLES

Step 15: Enable SNMP on the Networks1 router

Networks1/configure/crypto/> exit
Networks1/configure> snmp
Networks1/configure/snmp> community public rw
Networks1/configure/snmp> exit

Step 16: Display SNMP communities

Networks1> show snmp communities
Community = public, privilege=rw
Step 17: Repeat steps 1 - 16 with suitable modifications on
Networks2 prior to managing Networks1 from the Networks2 LAN
side
Step 18: Test the IPSec tunnel for managing the Networks1 router
from a host on the Networks2 LAN.
Step 19: When the SNMP manager starts managing Networks1 from
the Networks2 LAN, display the IKE and IPSec SA tables
Networks1> show crypto ike sa all
Networks1> show crypto ike sa all detail
Networks1> show crypto ipsec sa all
142 Avaya Secure Router 1000 Series Configuration Guide December 2010