Avaya 1000 Series Configuration Manual page 336

Configuring Packet Capture
SR/debug/pcap/capture cap1> size 400
SR/debug/pcap/capture cap1> drop-nonip
SR/debug/pcap/capture cap1> direction in
SR/debug/pcap/capture cap1> filter fil1 in
SR/debug/pcap/capture cap1> snaplen 256
SR/debug/pcap/capture cap1> commit
SR/debug/pcap/capture cap1> show-config
Packet Capture : cap1
======================================
Interface attached : ethernet0
State : Disabled.
Configurations committed
Duration of session : 0 secs
Direction : IN
Buffer Wrap OFF
Number of packets to capture :1000
Capture length is 256 bytes in each packet
Capture non-IP packets OFF
0 packets captured in this session
Buffer size for this session: 400KB
Inbound Filter : fil1
Filter Rule List : fil1
1. permit ip any any
2. permit icmp any any
Outbound Filter : Not configured
SR/debug/pcap/capture cap1> exit
SR/debug/pcap> enable
Enabled session cap1
SR/debug/pcap> stats cap1
Packet Capture : cap1
======================================
Interface attached : ethernet0
State : Enabled
Session active since : 44 secs
Direction : IN
Number of inbound packets captured : 135
Number of outbound packets captured : 0
Actual capture size : 14896 bytes
IP Packet Filter Statistics
===========================
Inbound Packets :
Matched 135
Unmatched 0
Outbound Packets :
Matched 0
Unmatched 0
336 Avaya Secure Router 1000 Series Configuration Guide December 2010