Configure The Secure Router 1000 Series At Site A; Configure The Secure Router 1000 Series At Site B - Avaya 1000 Series Configuration Manual

The installation of the network route is based on that route being different from the Secure
Router A interface route. Consider a single subnet addressing approach with:
• Router 1: 192.168.0.1/29
• Router 2: 192.168.0.4/29
• Secure Router A: 192.168.0.2/29
• Secure Router B: 192.168.0.3/29
Secure Router A would not install a network route to the remote Ethernet subnet since it would
duplicate the Secure Router A Ethernet interface route.

Configure the Secure Router 1000 Series at Site A

SR> configure term
SR/configure> interface ethernet 0
SR/configure/interface/ethernet> ip addr 192.168.0.2
255.255.255.252
SR/configure/interface/ethernet> exit
SR/configure> interface bundle wan1
SR/configure/interface/bundle> link t1 1-2
SR/configure/interface/bundle> encap ppp
SR/configure/interface/bundle> exit
SR/configure> autoconf
SR/configure> exit

Configure the Secure Router 1000 Series at Site B

SR> configure term
SR/configure> interface ethernet 0
SR/configure/interface/ethernet> ip addr 192.168.0.5
255.255.255.252
SR/configure/interface/ethernet> exit
SR/configure> interface bundle wan1
SR/configure/interface/bundle> link t1 1-2
SR/configure/interface/bundle> encap ppp
SR/configure/interface/bundle> exit
SR/configure> autoconf
SR/configure> exit
Avaya Secure Router 1000 Series Configuration Guide
IP Unnumbered Auto-Configuration
December 2010 39