Pim Configuration Examples - Avaya 1000 Series Configuration Manual

PIM Quick Configuration
Display PIMC timers
Display PIM interfaces
Display PIM neighbors
Display PIM Bootstrap
info
Display PIM Candidate
RP info
Display PIM statistics
Display PIM RP set
Display PIM Static RP
Trace PIM packets
Trace PIM state changes
Trace PIM routes
Trace PIM detail
Trace PIM debug
All Traces

PIM Configuration Examples

This section shows examples of how the PIM commands are used.
To access PIM mode, enter:
Router/configure/ip> pim
Router/configure/ip/pim>
The following example enters the BSR mode.
Router/configure/ip/pim> cbsr
Router/configure/ip/pim/cbsr>
The following command sets Ethernet1 as the BSR interface.
Router/configure/ip/pim/cbsr> interface ethernet1
The following example sets the holdtime to 33 seconds.
Router/configure/ip/pim/cbsr> holdtime 33
204 Avaya Secure Router 1000 Series Configuration Guide
SR>show ip pim timers
SR>show ip pim interfaces
SR>show ip pim neighbors
SR>show ip pim bsr-info
SR>show ip pim crp-info
SR>show ip pim statistics
SR>show ip pim rp-set
SR>show ip pim rp
SR> debug ip pim packet <pkt_type>
<direction> [interface_name ] [ dlci ]
SR> debug ip pim state
SR> debug ip pim route
SR> debug ip pim detail
SR> debug ip pim debug
SR>debug ip pim all
December 2010