Avaya 1000 Series Configuration Manual page 208

PIM Quick Configuration
To view RP-set information, enter:
Router/configure> show ip pim rp-set
Group/mask Src/RP Pri Uptime Expires
---------- ------ --- ------ -------
224/4 10.10.1.1 1 Static RP
Dependencies: None
Router/configure>
To view PIM counters, enter:
Router/configure> show ip pim statistics
PIM Statistics:
Total PIM msgs recvd 0 (0 bytes)
Recvd msgs too short 0
Recvd msgs bad checksum 0
Recvd msgsg bad version 0
Recvd register msgs 0 (0 bytes)
Recvd registers wrong iif 0
Recvd bad registers 0
Sent register msgs 0 (0 bytes)
Router/configure>
To display PIM timer information, enter:
Router/configure> show ip pim timers
PIM Timers:
Hello Interval: 145
Hello Hold Time: 60
Hello Priority: 15
Join/Prune Interval: 300
Join/Prune Hold Time: 30
Assert Hold Time: 200
Probe Period: 15
Register Suppress Timeout: 90
MRT Interval: 15
MRT SPT Multiplier : 10
MRT Stale Multiplier: 5
Router/configure>
To examine PIM BSR statistics, enter:
Router/configure/ip/pim> show ip pim bsr-info
Candidate BSR Information
-----------------------
Candidate BSR Status: Disabled
Candidate BSR Interface: NOT CONFIGURED
Candidate BSR Priority: 45
Candidate BSR Period: 30
Candidate BSR Hold Time: 2048
Candidate BSR Admin Scope: Disabled
No BSR's
Router/configure/ip/pim>
To reset PIM counters, enter:
SR> clear ip pim statistics
208 Avaya Secure Router 1000 Series Configuration Guide December 2010