Avaya 1000 Series Configuration Manual page 64

Accounting under TACACS support
configure terminal
2. Enter the aaa command sub-tree.
aaa
3. Configure an access-list for commands.
accounting commands <listname | [default]> <start_stop|stop_only|
wait-start>
4. Configure an access-list for a network.
accounting network <listname | [default]> <start_stop|stop_only|wait-
start>
5. Exit back a level.
exit
6. Enter interface mode.
interface <interface>
7. Apply accounting to the interface.
aaa accounting <commands|network> <list>
Table 11: Variable definitions
Variable
<commands|network>
<interface>
<list>
<listname>
<start_stop|stop_only|wait-
start>
64 Avaya Secure Router 1000 Series Configuration Guide
The type of accounting to apply to the interface.
The interface to work with.
The list to apply to the interface.
The name of the accounting list. If list name is specified as "default",
all interfaces use this list without further configuration.
• start_stop - Start and Stop records are sent.
• stop_only - Only Stop records are sent.
• wait-start - Start and Stop records are sent, but service starts after
acknowledgement.
Value
December 2010