Avaya 1000 Series Configuration Manual page 30

Source IP Enhancements
syslog
4. Configure the source address.
source-address {<A.B.C.D> | <interface-name>}
Table 7: Variable definitions
Variable
<A.B.C.D>
<interface-name>
Configuring QoS Historical Statistics source address
Use the following procedure to configure QoS Historical Stats server source address for all services.
Procedure steps
1. To configure source addresses for a service, enter Configuration Mode.
configure terminal
2. Enter the qos subtree.
qos
3. Enter the historical-stats subtree.
historical-stats
4. Configure the source address.
source-address {<A.B.C.D> | <interface-name>}
Table 8: Variable definitions
Variable
<A.B.C.D>
<interface-name>
30 Avaya Secure Router 1000 Series Configuration Guide
Specify source address by IP address.
Specify source address by interface name.
Specify source address by IP address.
Specify source address by interface name.
Value
Value
December 2010