Step 15: Display Firewall Policies In The Corp Map; Step 16: Display Firewall Policies In The Corp Map In Detail; Step 17: Repeat Steps 1 -16 With Suitable Modifications On Networks2 Prior To Passing Traffic; Step 18: Test The Ipsec Tunnel Between Networks1 And Networks2 By Passing Traffic From The 10.0.1.0 To The 10.0.2.0 Network - Avaya 1000 Series Configuration Manual

10.0.1.0 24
Networks1/configure/firewall corp/policy 1000 in> exit
Networks1/configure/firewall corp> exit

Step 15: Display firewall policies in the corp map

Networks1> show firewall policy corp

Step 16: Display firewall policies in the corp map in detail

Networks1> show firewall policy corp detail
Step 17: Repeat steps 1 -16 with suitable modifications on
Networks2 prior to passing traffic
Step 18: Test the IPSec tunnel between Networks1 and Networks2
by passing traffic from the 10.0.1.0 to the 10.0.2.0 network
Step 19: After transit traffic is passed through the tunnel, display
the IKE and IPSec SA tables
Networks1> show crypto ike sa all
Networks1> show crypto ike sa all detail
Networks1> show crypto ipsec sa all
Avaya Secure Router 1000 Series Configuration Guide
Example 2: Joining Two Private Networks with an IP Security Tunnel
December 2010 147