Avaya 1000 Series Configuration Manual page 230

QOS Configuration
2. To select the interface, enter:
3. To enter the QoS tree, enter:
4. To create a traffic class, enter:
5. To configure the traffic class, enter:
6. To classify traffic, use the "add" commands. For example, to classify traffic according
7. To assign an SPQ queue, enter:
8. To exit class configuration mode, enter:
9. To configure the committed rate for the queue:
10. To exit QoS configuration mode, enter:
Enable SPQ for Ethernet Interface
1. To enter the configuration mode, enter:
2. To select the ethernet interface, enter:
3. To specify qos chassis configuration, enter:
4. To enable SPQ, enter:
230 Avaya Secure Router 1000 Series Configuration Guide
configure terminal
interface ethernet <port number, 0 or 1>
qos
add_class <class-name> <parent-name> <cr_percent>
<br_percent>
class <class-name>
to diffServ code point, use:
add_dscp <value>
assign-queue <queue number, range 1–8>
exit
queue <queue number, range 1–8> <cr_percent>
exit
configure terminal
interface ethernet <port number, 0 or 1>
qos
enable spq output
December 2010