Time Of Day Scheduling For Isdn - Avaya 1000 Series Configuration Manual

Backup Interface-ISDN
1. Enter configuration mode:
2. Specify the ISDN bundle to configure as the backup:
3. Specify ISDN configuration:
4. Specify the WAN interface to back up:
Example
The following shows an example configuration
Host/configure > interface bundle bri
configuring existing WAN bundle interface bri
Host/configure/interface/bundle bri > isdn
Host/configure/interface/bundle bri/isdn > backup ?
NAME
backup - Configure interface to backup (bundle name)
SYNTAX
backup bundle_name <cr>
DESCRIPTION
bundle_name -- bundle name to backup
(enter a word )
Host/configure/interface/bundle bri/isdn > backup wan
Warning: Idle timer will be disabled..
The preceding configuration configures the bundle bri as a backup for the bundle wan which is
the primary link.

Time of day scheduling for ISDN

With time of day scheduling, you can configure the date and time for triggering any ISDN call.
This feature allows you to configure the time schedule in two different ways: periodic and
absolute. With periodic scheduling, you can configure a time range that reoccurs every week.
With absolute scheduling, you can configure a specific time range on the calendar.
This feature can work with the backup feature. In this case, when the Serial interface is down,
an ISDN call is triggered based on the configured schedule. Only if the current time is within
the time range schedule that is configured on the bundle is the ISDN call triggered; otherwise,
the ISDN call is not initiated.
CLI Display
The threshold for triggering the 2nd bundle can be configured using the following CLI.
Host/configure >time-range <time-range name>
NAME
time-range - configure time-range
SYNTAX
time-range timeRangeName <cr>
282 Avaya Secure Router 1000 Series Configuration Guide
configure terminal
interface bundle <name>
isdn
backup <bundle-name>
December 2010