Avaya 1000 Series Configuration Manual page 198

Multilink Frame Relay
DTE-1/configure/interface todce2> fr
Configure PVC 100 and provision FRF.12 fragmentation on it:
DTE-1/configure/interface todce2/fr> pvc 200
DTE-1/configure/interface todce2/fr/pvc 200> ip addr 2.2.2.2 24
DTE-1/configure/interface todce2/fr/pvc 200> frf12 framesize 128
DTE-1/configure/interface todce2/fr/pvc 200> exit 4
Configure DCE-1 to provision PVC 100 for switching:
Example
Configure a bundle:
DCE-1/configure> interface bundle todte1
DCE-1/configure/interface todte1> link t1 1:1-2
DCE-1/configure/interface todte1> encap fr
DCE-1/configure/interface todte1> fr
DCE-1/configure/interface todte1/fr> intf_type dce
Configure the switched PVC 100:
DCE-1/configure/interface todte1/fr> pvc 100
DCE-1/configure/interface todte1/fr/pvc 100> switch nnibundle:200
DCE-1/configure/interface todte1/fr/pvc 100> exit 3
Configure PVC 200 on an NNI interface used for switching traffic between PVC 100 on todte1
interface:
Example
Configure a bundle: D
CE-1/configure> interface bundle nnibundl
DCE-1/configure/interface nnibundle> link t1 1:1-2
DCE-1/configure/interface nnibundle> encap fr
DCE-1/configure/interface nnibundle> fr
DCE-1/configure/interface nnibundle/fr> intf_type nni
Configure the switched PVC 200: D
CE-1/configure/interface nnibundle/fr> pvc 200
DCE-1/configure/interface nnibundle/fr/pvc 200>switch todte1:100
DCE-1/configure/interface nnibundle/fr/pvc 100>exit 3
198 Avaya Secure Router 1000 Series Configuration Guide December 2010