Numbering Plan And Type Of Number For Isdn - Avaya 1000 Series Configuration Manual

SYNTAX
outgoing enable <cr>
DESCRIPTION
enable -- enable or disable the filter for IGRP, OSPF, VRRP,
ICMP, IGMP, PIM, RIP, BGP
The parameter may have any of the following values:
enable -- enable
IGRP -- IGRP
OSPF -- OSPF
VRRP -- VRRP
ICMP -- ICMP
IGMP -- IGMP
PIM -- PIM
RIP -- RIP
BGP -- BGP

Numbering Plan And Type Of Number for ISDN

The Secure Router CLI provides options to configure the Numbering Plan and Type of Number.
This allows you to select the Numbering Plan and Type of Number for the Called Party Number.
Use the following procedure to configure these parameters.
1. Enter configuration mode:
2. Specify an existing ISDN bundle:
3. Specify ISDN configuration:
4. To specify the numbering plan, enter:
5. To specify the type of number, enter:
Table 38: Variable definitions
numplan <numplan>
Avaya Secure Router 1000 Series Configuration Guide
configure terminal
interface bundle <name>
isdn
numplan <numplan>
typeofnum <typeofnum>
Variable
Numbering Plan And Type Of Number for ISDN
Value
Specifies the numbering plan. The
<numplan> parameter can have any of the
following values:
• unknown: Unknown plan
• isdn: ISDN/Telephony Numbering plan
(default)
• reserved: Telephony Numbering plan
December 2010 285