Avaya 1000 Series Configuration Manual page 95

rate <baudrate>
6. Configure data bits.
databits <databits>
7. Configure the parity settings.
parity <setting>
8. Configure stop bits.
stopbits <stopbits>
9. Exit back a level.
exit
10. Begin configuring the modem.
modem
11. Configure the phone number to be called by the modem.
phonenum <number>
12. Configure the number of rings before answering.
answer <rings>
13. Configure the number of rings to wait during call setup.
call-setup-timeout <rings>
14. Configure the "lost carrier" hang up delay.
hangup <delay>
15. Configure the carrier detect response time.
detect <responsetime>
16. Configure the "wait for carrier" after dial delay.
wait <wait>
17. Configure using an AT string.
at <at_string>
18. Exit back a level.
exit
19. Configure the dialer idle-timeout interval.
idle-timeout <timeout>
20. Exit back a level.
exit
21. To attach to a bundle, create a bundle.
Avaya Secure Router 1000 Series Configuration Guide December 2010 95