Avaya 1000 Series Configuration Manual page 101

Table 24: Variable definitions
<destination>
<listname>
<procotol>
<rule_action>
<rule_lineno>
Deleting a rule from a rule list
Procedure steps
1. Enter Configuration Mode.
2. Select the access-list.
3. Delete the rule.
Table 25: Variable definitions
<listname>
<rule_lineno>
Displaying access lists, rule sets and statistics
Procedure steps
1. Display all access lists.
2. Display access list rules.
3. Display access list statistics.
Avaya Secure Router 1000 Series Configuration Guide
Variable
IP destination address (a.b.c.d/a.b.c.d or a.b.c.d/0-32 or
any).
The ACL name.
The protocol, tcp/udp/icmp/ip or 0-255.
permit rule or deny rule or reject rule (reject rule can be
specified only with ICMP protocol).
The line number, in the range 1 to 65535.
configuration terminal
ip access-list <listname>
delete <rule_lineno>
Variable
show ip access-lists all
show ip access-list-rules <all | [VLAN subinterface]>
show ip access-list-stats <VLAN subinterface>
Value
Value
The ACL name.
The line number, in the range 1 to 65535.
Configurations
December 2010 101