Avaya 1000 Series Configuration Manual page 94

Dial Backup via External Modem
Table 20: Programmed modem default settings
S0
S1
S7
S9
S10
Table 21: Operation commands
A
D
E0
H0
H1
N1
+++
Users have the option of creating multiple PPP backup bundles containing different configuration criteria
and specifying them by order of priority. At this time, the Secure Routers contain only one Aux port,
however the design of the feature is easily scalable should the option of multiple Aux ports become
available.
The modems currently supported by this feature include Creative Blaster V9.2, Diamond Supra Max V9.2
and Best Data 56 K v9.2/v4.4.
Configuring dial backup via external modem
Use the following procedure to configure dial backup via external modem.
Procedure steps
1. To configure dial backup, enter Configuration Mode.
configure terminal
2. Create a dialer.
dialer <name>
3. Configure async parameters.
async
4. Configure the async port.
port <port>
5. Configure the baud rate.
94 Avaya Secure Router 1000 Series Configuration Guide
rings to auto answer
ring counter
wait for carrier after dialing
carrier detect response time
lost carrier hang up delay
cause modem to go off hook, works with ring detection
dial digit
echo off
on hook
off hook
enable auto mode
mode change between data or command mode
December 2010