VLAN Tagging
See the Command Reference configure interface vlan management commands for more
information. See the show vlanfwd management command to view all the management disabled
interfaces of the router.
In this example application, the POP router is configured with the following three subinterfaces:
• 205.1.1.1
• 205.1.1.5
• 10.1.1.5
Reston configuration: Channelized T3 Router
Channelized_T3/configure> hostname reston
reston/configure> no ftp_server
reston/configure> no autoconf
Configure interface bundle balt1
reston/configure> interface bundle balt1
reston/configure/interface/balt1> link ct3 1 1
reston/configure/interface/balt1> encapsulation fr
reston/configure/interface/balt1> fr
reston/configure/interface/balt1/fr> intf_type dce
Configure interface balt1 pvc 100
Configure interface balt1 pvc 100
reston/configure/interface/balt1/fr> pvc 100
reston/configure/interface/balt1/fr/pvc 100> policing
cir 1536000 bc 1536000 be 1536000
reston/configure/interface/balt1/fr/pvc 100> shaping cir
1536000 bcmax 1536000 bcmin 1536000 be 1536000
>The Baltimore router is 205.1.1.2/30.
> The PVC uses a private address on the Reston end.
reston/configure/interface/balt1/fr/pvc 100> ip addr
10.1.1.1 255.255.255.252
> The POP router is 205.1.1.1/30
reston/configure/interface/balt1/fr/pvc 100> ip
source_forwarding 205.1.1.1
reston/configure/interface/balt1/fr/pvc 100> vlan
reston/configure/interface/balt1/fr/pvc 100/vlan> vlanid
252
Avaya Secure Router 1000 Series Configuration Guide
December 2010