Standard Mibs - Avaya 1000 Series Configuration Manual

Standard MIBs

Refer to the README file for details. Be sure to compile rfc1214.mib before you compile any
standard MIBs. The Standard MIB folder contains the following MIBs:
iana-iftype.mib
This contains the ifType enumerated values needed for rfc1213.mib and rfc2233.mib. Compile
iana-iftype.mib before you compile rfc2233.mib. This MIB does not contain any traps.
rfc1213.mib
Standard MIB-II objects for TCP/IP networks. This MIB does not contain any traps.
rfc1315.mib
This MIB manages specified Frame Relay DLCI parameters. Use this MIB to:
Be notified when a Virtual Circuit changes state (frDLCIStatusChange)
rfc1406.mib
MIB objects for DS1 interface. This MIB does not contain any traps.
rfc1407.mib
MIB objects for DS3 interface. This MIB does not contain any traps.
rfc1643.mib
MIB objects for Ethernet-like interface. This MIB does not contain any traps.
rfc1657.mib
This MIB manages specified BGP parameters. This MIB does not contain any traps.
Avaya Secure Router 1000 Series Configuration Guide
Simple Network Management Protocol
December 2010 349