Avaya 1000 Series Configuration Manual page 96

Dial Backup via External Modem
interface bundle <bundlename>
22. Configure the bundle to use the dialer.
link dialer <dialer>
23. Continue normal configuration of the bundle.
Table 22: Variable definitions
Variable
<at_string>
<baudrate>
<bundlename>
<databits>
<delay>
<dialer>
<name>
<number>
<port>
<responsetime>
<rings>
<setting>
<stopbits>
<timeout>
<wait>
96 Avaya Secure Router 1000 Series Configuration Guide
The AT string used to configure the dialer.
The Baud rate of the modem, default 56000.
The name of the bundle.
The number of databits, default 8.
The lost carrier hang up delay, in the range 1 to 255. Default is 14.
The dialer name to link, maximum 8 characters.
The dialer name, maximum 8 characters.
The phone number, maximum length 25 characters, with or without hyphens.
Prepending p or t indicates pulse or tone dialing.
The port description, maximum 10 characters.
The carrier detect response time, in the range 1 to 255. Default is 6.
The number of rings, in the range 1 to 255.
The parity setting -none, even, or odd. Default is none.
The number of stopbits -1, 2, or 3. Default is 1.
The idle timeout time, in the range 1 to 6000. Default is 180.
The length of time to wait for dial delay, in the range 1 to 255. Default is 50.
Value
December 2010