Avaya 1000 Series Configuration Manual page 52

DHCP Server Configuration
4. To configure the alternate VLAN ID for IP Phones, enter:
5. To specify the call server for IP Phones, enter:
6. To specify a wireless server name for IP Phones, enter:
7. To specify a TFTP server for IP Phones, enter:
Name
altvlan <vlanid>
callserver <ip1> port
<port_val> appserver
<ip2> svpserver <ip3>
52 Avaya Secure Router 1000 Series Configuration Guide
pool <name>
altvlan <vlanid>
callserver <ip1> port <port_val> appserver <ip2> svpserver
<ip3>
wireless <wireless-server>
Note:
This command cannot be present with any of the other IP Phone options.
tftpserver <tftp-server>
Description
Specifies an alternate VLAN ID for IP Phones. Valid range for <vlan
id> is an integer of value 0 - 65535.
This command configures DHCP option 191, which configures the
alternate VLAN id that the IP phone is to use. This command
configures a dummy DHCP option 128 so that the IP phone accepts
this option.
Example:
R1/configure/ip/dhcps/pool x # altvlan 100
Specifies the call server for IP Phones.
• <ip1>: Specifies the IP address of the call server port
• port <port_val>: Specifies the port number on which the call
server is listening, in the range 1024 – 65535 (default 4100)
• appserver <ip2>: Specifies the IP address of the XAS application
server
• svpserver <ip3>: Specifies the IP address of the SpectraLink
Voice Priority (SVP) server
•
This command configures DHCP option 128. There can be up to 2
call servers in a DHCP pool. The first call server entered is the
primary call server.
The svpserver option configures dhcp option 151.
Example:
R1/configure/ip/dhcps/pool x # callserver
10.10.10.10 port 4200 appserver 20.20.20.20
svpserver 30.30.30.30
December 2010