Avaya 1000 Series Configuration Manual page 348

Management Configuration Guide
ntEnterpriseDataTasmanMgmtsnAg.mib
This MIB allows file uploads/downloads, reload of router, configuration of telnet/welcome
banners, TACACS/Radius servers, Syslog server, trap receive managers, DNS configurations
etc.
ntEnterpriseDataTasmanMgmtsnmp.mib
This MIB defines objects related to SNMP configuration mainly community and trap_host
configurations. This MIB does not contain any traps.
ntEnterpriseDataTasmanMgmtsystem.mib
This MIB defines system objects such as IP Address, hostName and DNS server. Use this MIB
to:
• Be notified when an SNTP client is enabled (ntSRsntpEnableNotification).
• Be notified when an SNTP client is disabled (ntSRsntpDisableNotification).
• Be notified when an SNTP client is connected to a network time server
(ntSRsntpSuccessNotification)
• Be notified when an SNTP client is having problems connecting to a network time server
(ntSRsntpErrorNotification)
• Be notified when an there is a system shutdown (ntSRshutDownNotification)
• Be notified when a user logs in successfully (ntSRuserAccessNotification)
• Be notified when a user logs off(ntSRuserLogOffNotification)
• Be notified when a user is having trouble logging in (ntSRuserLoginFailNotification)
ntEnterpriseDataTasmanMgmtMgmtserial.mib
This MIB manages serial (v.35 type) interfaces.
Use this MIB to:
• Be notified when a serial interface alarm is on (ntSRserialIfAlarmOnTrap).
• Be notified when a serial interface alarm is turned off (ntSRserialIfAlarmOffTrap).
348 Avaya Secure Router 1000 Series Configuration Guide December 2010