Step 10: Configure Radius Server (Applicable Only If Client Authentication Is Configured In Dynamic Ike Policy); Step 11: Configure Firewall Policies To Allow Ike Negotiation Through Untrusted Interface; Step 12: Display Firewall Policies In The Internet Map; Step 13: Display Firewall Policies In The Internet Map In Detail - Avaya 1000 Series Configuration Manual

Step 10: Configure radius server (applicable only if client
authentication is configured in dynamic IKE policy)
Networks1/configure> aaa
Networks1/configure/aaa> radius
Networks1/configure/aaa/radius> primary_server 172.168.2.1
Primary Radius server configured.
Networks1/configure/aaa/radius> secondary_server 192.168.2.1
Secondary Radius server configured.
Networks1/configure/aaa/radius> exit
Networks1/configure/aaa> exit
Step 11: Configure firewall policies to allow IKE negotiation through
untrusted interface
Networks1/configure> firewall internet
Networks1/configure/firewall internet> policy 1000 in service ike self
Networks1/configure/firewall internet/policy 1000 in> exit
Networks1/configure/firewall internet> exit

Step 12: Display firewall policies in the Internet map

Networks1> show firewall policy internet

Step 13: Display firewall policies in the Internet map in detail

Networks1> show firewall policy internet detail
Avaya Secure Router 1000 Series Configuration Guide
Example 4: Supporting Remote User Access
December 2010 157