Chapter 2: Avaya Secure Router 3120 Basics; Default Login Parameters; Enable Telnet Server; Enable Web User Interface - Avaya Secure Router 3120 Command Reference Manual

Chapter 2: Avaya Secure Router 3120

Default Login Parameters

By default, the Avaya Secure Router 3120 ships with the following login parameters for all
management methods:
Username: admin Password: setup
Note:
Login information is case sensitive.

Enable Telnet Server

After upgrading the Secure Router 3120, telnet server is disabled by default. To enable the
telnet server, use the following command:
SR/config> telnet_server

Enable Web User Interface

To enable the Web User Interface, use the following command:
SR/config> gui enable
Avaya Secure Router 3120 Command Reference Guide
Basics
December 2010 35