Radios; Status - Motorola WiNG 5.7.1 System Reference Manual

13.3.10 Radios

Access Point Statistics
The Radio statistics screens display information on access point radios. The actual number of radios depend on the access point
model and type. This screen displays information on a per radio basis. Use this information to refine and optimize the
performance of each radio and therefore improve network performance.
The access point's radio statistics screens provide details about associated radios. It provides radio ID, radio type, RF quality
index etc. Use this information to assess the overall health of radio transmissions and access point placement. An AP7131N
model access point can support from 1-3 radios depending on the SKU purchased. AP6532, AP6522, AP6562, AP7161, AP7181,
AP7502, AP7522, AP7532, AP7562, AP8122, AP8132, AP8222 and AP8232 access points are dual radio models and AP6511
and AP6532 access points are both single radio models. An ES6510 is a controller or service platform managed Ethernet Switch,
with no embedded device radios.
Each of these screens provide enough statistics to troubleshoot issues related to the following three areas:
•

Status

• RF Statistics
• Traffic Statistics
Individual access point radios display as selectable links within each of the three access point radio screens. To review a radio's
configuration in greater detail, select the link within the Radio column of either the Status, RF Statistics or Traffic Statistics
screens.
Additionally, navigate the Traffic, WMM TSPEC, Wireless LANs and Graph options available on the upper, left-hand side, of
the screen to review radio traffic utilization, WMM QoS settings, WLAN advertisement and radio graph information in greater
detail. This information can help determine whether the radio is properly configured in respect to its intended deployment
objective.
13.3.10.1 Status
Radios
Use the Status screen to review access point radio stats in detail. Use the screen to assess radio type, operational state,
operating channel and current power to assess whether the radio is optimally configured.
To view access point radio statistics:
1. Select the Statistics
2. Select System
connected access points.
3. Expand the Radios
4. Select Status.
menu from the Web UI.
from the navigation pane (on the left-hand side of the screen). Expand a RF Domain and select one of its
menu item.
13 - 77