Motorola WiNG 5.7.1 System Reference Manual page 444

5 - 360 WiNG 5.7.1 Access Point System Reference Guide
10. Select OK to save the changes and overrides made to the profile's Management Settings. Select
saved configuration.
11. Select the Firmware
12. Refer to the Auto Install via DHCP Option
Enable Configuration Update
Enable Firmware Update
13. Use the parameters within the
upgrade from a controller based file.
Enable Controller Upgrade
of AP Firmware
Number of Concurrent
Upgrades.
14. Select OK to save the changes and overrides made to the profile's Management Firmware configuration. Select
revert to the last saved configuration.
15. Select Heartbeat
16. Select the Service Watchdog
running and capable of effectively interoperating. The Service Watchdog is enabled by default.
tab from the Management menu.
Figure 5-242 Device Overrides - Management Firmware screen
field to define automatic configuration file and firmware updates.
Select this option to enable automatic configuration file updates for the controller
profile from a location external to the access point.
If enabled (the setting is disabled by default), provide a complete path to the target
configuration file used in the update.
Select this option to enable automatic firmware updates from a user defined remote
location. This value is disabled by default.
Automatic Adopted AP Firmware Upgrade
Select the access point model to upgrade using its associated Virtual Controller AP's
most recent firmware file for that model. This parameter is enabled by default.
Use the spinner control to define the maximum number (1 - 20) of adopted APs that
can receive a firmware upgrade at the same time. Keep in mind during a firmware
upgrade, the access point is offline and unable to perform its normal wireless client
support function until the upgrade process is complete.
from the Management menu.
Figure 5-243 Device Overrides - Management Heartbeat screen
option to implement heartbeat messages to ensure other associated devices are up and
Reset to revert to the last
field to define an automatic firmware
Reset to