Motorola WiNG 5.7.1 System Reference Manual page 422

5 - 338 WiNG 5.7.1 Access Point System Reference Guide
6. The NAT Pool tab displays by default. The NAT Pool screen lists those NAT policies created thus far. Any of these policies
can be selected and applied to a profile.
7. Select Add to create a new NAT policy that can be applied to a profile. Select
a existing policy or select
8. If adding a new NAT policy or editing the configuration of an existing policy, define the following parameters:
Name
IP Address Range
9. Select the + Add Row
Figure 5-224 Device Overrides - NAT Pool screen
Delete to remove obsolete NAT policies from the list of those available to a profile.
Figure 5-225 Device Overrides - Security - NAT Pool screen
If adding a new NAT policy, provide a name to help distinguish it from others with
similar configurations. The length cannot exceed 64 characters.
Define a range of IP addresses hidden from the public Internet. NAT modifies network
address information in the defined IP range while in transit across a traffic routing
device. NAT only provides IP address translation and does not provide a firewall. A
branch deployment with NAT by itself will not block traffic from being potentially routed
through a NAT device. Consequently, NAT should be deployed with a stateful firewall.
button as needed to append additional rows to the IP Address Range table.
Edit to modify or override the attributes of