Debugging Wireless Clients - Motorola WiNG 5.7.1 System Reference Manual

12 - 20 WiNG 5.7.1 Access Point System Reference Guide
5. Use the spinner to set a value for
this duration expires, the LEDs starts operating normally.
6. Click Locator ON
operation. Click

12.1.5.5 Debugging Wireless Clients

Troubleshooting the Device
Use the Debug Wireless Clients
intended. To view the
1. Select the target device from the left-hand side of the UI.
2. Select the down arrow next to the device to view a set of operations that can be performed on the selected device.
3. Select Troubleshooting
Figure 12-31 Device Pane - Locator screen
Flash LED Duration.
to start flashing the LEDs. Click
Close to close this window.
screen to assess whether a connection to a wireless client is proper and is working as
Debug Wireless Clients
Figure 12-32 Device Browser
Figure 12-33 Device Browser - Options for a device
to expand its sub-menu.
This is the duration, in minutes, the device will flash its LEDs. Once
Locator OFF to stop the LEDs from flashing and resume normal
screen: