Motorola WiNG 5.7.1 System Reference Manual page 722

9 - 54 WiNG 5.7.1 Access Point System Reference Guide
Bind DN
Base DN
Bind Password
Password Attribute
31. Set the following
Group Attribute
Group Filter
Group Membership
Attribute
32. Select the OK
configuration.
Specify the distinguished name to bind with the LDAP server. The DN is the name that
uniquely identifies an entry in the LDAP directory. A DN is made up of attribute value pairs,
separated by commas.
Specify a distinguished name (DN) that establishes the base object for the search. The base
object is the point in the LDAP tree at which to start searching. LDAP DNs begin with the most
specific attribute (usually some sort of name), and continue with progressively broader
attributes, often ending with a country attribute. The first component of the DN is referred to
as the Relative Distinguished Name (RDN). The RDN identifies an entry distinctly from any
other entries that have the same parent.
Enter a valid password for the LDAP server. Select the Show check box to expose the
password's actual character string. Leave the option unselected to display the password as a
string of asterisks (*). The password cannot 32 characters.
Enter the LDAP server password attribute. The password cannot exceed 64 characters.
Attributes for LDAP groups to optimally refine group queries:
LDAP systems have the facility to poll dynamic groups. In an LDAP dynamic group, an
administrator can specify search criteria. All users matching the search criteria are considered
a member of this dynamic group. Specify a group attribute used by the LDAP server. An
attribute could be a group name, group ID, password or group membership name.
Specify the group filters used by the LDAP server. The group filter is typically used for security
role-to-group assignments and specifies the property to look up groups in the directory
service.
Specify the group member attribute sent to the LDAP server when authenticating users.
button to save the changes to the LDAP server configuration. Select Reset to revert to the last saved