Motorola WiNG 5.7.1 System Reference Manual page 706

9 - 38 WiNG 5.7.1 Access Point System Reference Guide
To review existing RADIUS groups and add, modify or delete group configurations:
1. Select Configuration
2. Select Services.
3. Select RADIUS.
A list of existing groups displays by default.
4. Review the following read-only information for existing groups to determine if a new group requires creation or an existing
group requires modification:
RADIUS Group Policy
Guest User Group
Management Group
Role
tab from the Web user interface.
Figure 9-25 RADIUS Group screen
Displays the group name or identifier assigned to each listed group when it was created.
The name cannot exceed 32 characters or be modified as part of the group's edit process.
Specifies whether a user group only has guest access and temporary permissions to the
local RADIUS server. The terms of the guest access can be set uniquely for each group. A
red "X" designates the group as having permanent access to the local RADIUS server.
Guest user groups cannot be made management groups with unique access and role
permissions.
A green checkmark designates this RADIUS user group as a management group.
Management groups can be assigned unique access and role permissions.
If a group is listed as a management group, it may also have a unique role assigned.
Available roles include:
• monitor - Read-only access
• helpdesk - Helpdesk/support access
• network-admin - Wired and wireless access
• security-admin - Grants full read/write access
• system-admin - System administrator access