10 - 13
Trap Community
Provide a 32 character maximum trap community string. The community string
functions like a user id or password allowing access to access point resources. If the
community string is correct, the access point provides with the requested
information. If the community string is incorrect, the access point discards the
request and does not respond. Community strings are used only by devices which
support SNMPv1 and SNMPv2c. SNMPv3 uses username/password authentication,
along with an encryption key. The default setting is public.
5. Select
OK
to update the SNMP Trap configuration. Select
Reset
to revert to the last saved configuration.