Motorola WiNG 5.7.1 System Reference Manual page 805

Protocol
Port
IP Address
Hostname
Username/Password
Path
8. Select OK to import the defined RSA key. Select
9. To optionally export a RSA key to a remote location, select the
10. Export the key to a redundant RADIUS server so it can be imported without generating a second key. If there are more than
one RADIUS authentication servers, export the certificate and do not generate a second key unless you want to deploy two
root certificates.
Select the protocol used for importing the target key. Available options include:
• tftp
• ftp
• sftp
• http
• cf
• usb1
• usb2
• usb3
• usb4
Use the spinner control to set the port. This option is not valid for cf and usb1 - 4.
Enter IP address of the server used to import the RSA key. This option is not valid for cf
and usb1 - 4.
Provide the hostname or numeric IPv4 or IPv6 formatted address of the server used to
import the RSA key. IPV6 provides enhanced identification and location information for
computers on networks routing traffic across the Internet. IPv6 addresses are composed
of eight groups of four hexadecimal digits separated by colons. Providing a host is not
required for cf and usb1-4. A valid hostname cannot contain an underscore.
These fields are enabled if using ftp or sftp protocols. Specify the username and the
password for that username to access the remote servers using these protocols.
Specify the path to the RSA key. Enter the complete relative path to the key on the server.
Cancel to revert the screen to its last saved configuration.
Export button from the RSA Keys screen.
12 - 57