Upgrading Device Firmware - Motorola WiNG 5.7.1 System Reference Manual

Trust Point Valid
Until
6. Select Trigger Certificate Renewal
obtained certificate overwrites an existing certificate. If the renewal fails, an error is logged.
7. Select Refresh

12.1.4 Upgrading Device Firmware

Devices
To update the firmware of an access point:
1. Select a target device from the left-hand side of the UI.
2. Select the down arrow next to the device to view a set of operations that can b performed on the selected device.
3. Select the Firmware Upgrade
The expiration of the CMP certificate is checked once a day. When a certificate is about to
expire a certificate renewal can initiated with the server via an existing IPsec tunnel. If the
tunnel is not established, the CMP renewal request is not sent.
to begin update the credentials of the certificate. If a renewal succeeds, the newly
to update the screen to the last saved configuration.
Figure 12-13 Device Browser - Options for a device
button to upgrade the device's firmware.
Figure 12-14 Firmware Upgrade screen
12 - 11