Dhcpv6 Pool Configuration - Motorola WiNG 5.7.1 System Reference Manual

4. Select Restrict Vendor Options
DHCP options in this specific DHCPv6 policy.
5. Use the spinner control to select a
6. Set the following
Name
Code
Type
Vendor
7. Select OK to save the updates to the DHCPv6 options. Select

9.5.2 DHCPv6 Pool Configuration

Setting the DHCPv6 Server Policy
A DHCPv6 pool includes information about available configuration parameters and policies controlling the assignment of the
parameters to requesting clients from the pool.
To create a DHCPv6 pool configuration:
1. Select Configuration.
2. Select Services.
Figure 9-22 DHCP v6Server Policy - DHCPv6 Options tab
to restrict the use of vendor specific DHCPv6 options. This limits the use of vendor specific
DHCPv6 Server Preference
DHCPv6 Option configuration parameters:
Enter a name to associate with the new DHCP option. This name should describe the new
option's function.
Use the spinner control to specify a DHCP option code (from 0 - 254) for the option. Only one
code for each DHCPv6 option of the same value can be used in each DHCPv6 server policy.
Use the drop-down menu to select the DHCP option type for the new option. The option can be
either ASCII, which sends an ASCII compliant string to the client, ipv6 which sends an IPv6
compatible address to the client or Hex String which sends a hexadecimal string to the client.
Use the spinner control to specify the numeric Vendor ID for the new option. Each vendor should
have a unique vendor ID used by the DHCPv6 server to issue vendor specific DHCP options.
from 0 - 255. The default value is 0.
Reset to revert the screen back to its last saved configuration.
9 - 33