Motorola WiNG 5.7.1 System Reference Manual page 714

9 - 46 WiNG 5.7.1 Access Point System Reference Guide
Start Time
Expiry Date
Expiry Time
Access Duration
10. To allow the guest user unlimited data usage select Unlimited. To limit bandwidth, select Limited and refer to the Data field
to create bandwidth based access privileges:
Data Limit (KB)
Committed Downlink
Rate
Reduced Downlink
Rate
Committed Uplink
Rate
Reduced Uplink Rate
11. Select OK to save the user group membership configuration. Select Reset to revert to the last saved configuration.
Enter a start time, or use the spinner controls to select a starting time for the user's
credentials to start working. Use the AM and PM buttons to apply a morning or
afternoon/evening designation
Enter an end date, or use the calendar icon to define an expiration date for the user's
credentials. Selecting this option enables the Till Expiry radio button.
If using the Till Expiry option, enter an end time, or use the spinner controls to select an
ending time for the user's credentials to expire. Use the AM and PM buttons to apply a
morning or afternoon/evening designation.
Specify the time a user can access the system when time based access privilege are
applied.Select Till Expiry to allow user access until their configured expiry date and time
are met. To limit the time a user can access the captive portal during their configured time
period, specify the Days, Hours and Minutes the user is allowed access. The Access
Duration cannot exceed 365 days.
Use the spinner control to specify the maximum bandwidth consumable by the guest user.
Once a value is configured, select the measurement as either GB (Gigabytes) or MB
(Megabytes).
Use the spinner control to specify the download speed dedicated to the guest user. When
bandwidth is available, the user can download data at the specified rate. Once a value is
configured, select the measurement as either MBPS (Megabytes per second) or KBPS
(Kilobytes per second). If a guest user has a bandwidth based policy and exceeds the
specified Data Limit, their speed is throttled to the defined Reduced Downlink Rate.
Use the spinner control to specify a reduced speed for guest operation when they've
exceeded their specified data limit, if applicable. If a guest user has a bandwidth based
policy and exceeds the specified Data Limit, their speed is throttled to the Reduced
Downlink Rate. Once a value is configured, select the measurement as either MBPS
(Megabytes per second) or KBPS (Kilobytes per second).
Use the spinner control to specify the upload speed dedicated to the guest user. When
bandwidth is available, the user is able to upload data at the specified rate. Once a value
is configured, select the measurement as either MBPS (Megabytes per second) or KBPS
(Kilobytes per second). If a guest user has a bandwidth based policy and exceeds the
specified Data Limit, their speed is throttled to the Reduced Uplink Rate.
Use the spinner control to specify a reduced speed for guest operation when they've
exceed their specified data limit, if applicable. If a guest user has a bandwidth based
policy and exceeds the specified Data Limit, their speed is throttled to the Reduced Uplink
Rate. Once a value is configured, select the measurement as either MBPS (Megabytes per
second) or KBPS (Kilobytes per second).