Motorola WiNG 5.7.1 System Reference Manual page 840

13 - 24 WiNG 5.7.1 Access Point System Reference Guide
2. Select a RF Domain from under the
3. Select Wireless Clients
The Wireless Clients
MAC Address
IP Address
IPv6 Address
Hostname
Role
Client Identity
Vendor
Band
AP Hostname
Radio MAC
System node on the top, left-hand side, of the screen.
from the RF Domain menu.
Figure 13-14 RF Domain - Wireless Clients screen
screen displays the following:
Displays the hostname (MAC address) of each listed wireless client. This address is hard-
coded at the factory and can not be modified. The hostname address displays as a link that
can be selected to display configuration and network address information in greater detail.
Displays the current IP address the wireless client is using for a network identifier.
Displays the current IPv6 formatted IP address a listed wireless client is using as a network
identifier. IPv6 is the latest revision of the Internet Protocol (IP) designed to replace IPv4. IPv6
addresses are composed of eight groups of four hexadecimal digits separated by colons.
Displays the unique administrator assigned hostname when the client's configuration was
originally set.
Lists the role assigned to each controller, service platform or access point managed client.
Lists the client's operating system vendor identity (Android, Windows etc.)
Displays the vendor (or manufacturer) of the wireless client.
Lists the 2.4 or 5 GHz radio band the listed client is currently utilizing with its connected access
point within the RF Domain.
Displays the administrator assigned hostname of the access point to which the client is
connected.
Lists the hardware encoded MAC address of the access point radio to which the client is
currently connected within the RF Domain.