Motorola WiNG 5.7.1 System Reference Manual page 743

12. Select Fetch Historical Events
RF Domain events. The following event data is fetched and displayed:
Timestamp
Module
Message
Severity
Source
Hostname
RF Domain
13. Select Clear Events to clear the event table and begin a new data collection for the specified device.
from the lower, right-hand, side of the UI to populate the table with either device or
Displays the timestamp (time zone specific) each listed event occurred.
Displays the module tracking the listed event. Events detected by other modules are not
tracked.
Displays error or status message for each event.
Displays event severity as defined for tracking from the Configuration screen. Severity
options include:
• All Severities – All events are displayed regardless of severity
• Critical – Only critical events are display
• Error – Only errors display
• Warning – Only warnings display
• Informational – Only informational events display, no critical events, errors or
warnings.
Displays the MAC address of the device tracked by the selected module.
Displays the Hostname/IP address of the device tracked by the selected module.
Displays the RF Domain where the selected access point MAC address resides.
11 - 5