Guest Users - Motorola WiNG 5.7.1 System Reference Manual

13.3.20 Guest Users

Access Point Statistics
A captive portal is an access policy for providing guests temporary and restrictive access to the wireless network. A captive
portal configuration provides secure authenticated access using a standard Web browser. Captive portals provide
authenticated access by capturing and re-directing a wireless user's Web browser session to a captive portal login page where
the user must enter valid credentials to access to the network. Captive portals can have their access durations set by an
administrator to either provide temporary access to the controller or service platform managed network or provide access
without limitations.
To view the controller or service platform guest user utilization:
1. Select the Statistics
2. Select System
connected access points.
3. Select Guest Users
The Guest Users
Name
Configured Time
(days:hrs:mins:secs)
Remaining Time
(days:hrs:mins:secs)
Configured KiloBytes
Configured Downlink
Rate (kbps)
menu from the Web UI.
from the navigation pane (on the left-hand side of the screen). Expand a RF Domain and select one of its
from the left-hand side of the UI.
Figure 13-68 Access Point - Guest Users screen
screen describes the following:
Lists the administrator assigned name of the client utilizing the controller or service platform
for guest access to the wireless network.
Displays the time each listed client was initially configured for (in days:hrs:mins:secs format)
in their captive portal session.
Displays the time each listed client has remaining (in days:hrs:mins:secs format) in their
captive portal session.
If the user does not have a bandwidth based voucher, the time configured and remaining are
labeled as unlimited.
If the user does not have a bandwidth based voucher, the time configured and remaining are
labeled as unlimited.
13 - 117