Motorola WiNG 5.7.1 System Reference Manual page 662

8 - 38 WiNG 5.7.1 Access Point System Reference Guide
15. Select OK to save the updates to the MU Anomaly configuration used by the WIPS policy. Select
saved configuration. The WIPS policy can be invoked at any point in the configuration process by selecting
Wireless IPS Policy
16. Select the AP Anomaly
configuration parameters.
AP Anomaly events are suspicious frames sent by neighboring APs. Use the
17. Enable or disable the following
Name
Enable
Use the Enable All
18. Select OK to save the updates to the AP Anomaly configuration used by the WIPS policy. Select
saved configuration. The WIPS policy can be invoked at any point in the configuration process by selecting
Wireless IPS Policy
from the upper, left-hand side, of the access point user interface.
tab. Ensure the Activate Wireless IPS Policy
Figure 8-23 Wireless IPS screen - WIPS Events - AP Anomaly tab
AP Anomaly Events:
Displays the name of the excessive action event representing a potential threat to the
network. This column lists the event being tracked against the defined thresholds set for
interpreting the event as excessive or permitted.
Displays whether tracking is enabled for each AP Anomaly event. Use the drop-down
menu to enable/disable events as required. A green check mark defines the event as
enabled for tracking against its threshold values. A red "X" defines the event as disabled
and not tracked by the WIPS policy. Each event is disabled by default.
button to enable all AP Anomaly Events. Use
from the upper, left-hand side, of the access point user interface.
option remains selected to enable the screen's
AP Anomaly tab to enable or disable an event.
Disable All button to disable all AP Anomaly Events.
Reset to revert to the last
Activate
Reset to revert to the last
Activate