Motorola WiNG 5.7.1 System Reference Manual page 557

Day
Start Time
End Time
17. Set the following Scanning Configurations
Duration
Frequency
Extended Scan
Frequency
Sample Count
Client Aware Scanning
Power Save Aware
Scanning
Voice Aware Scanning
18. Select OK to update the Smart RF Scanning Configuration settings. Select
19. Select Recovery.
The Neighbor Recovery
how 2.4 and 5.0 GHz radios compensate for failed neighbor radios, interference, coverage holes and loss of root path
requiring neighbor radio intervention.
20. Set the Hold Time for the Smart RF configuration.
Use the drop-down menu to select a day of the week to apply the override. Selecting All
will apply the policy every day. Selecting weekends will apply the policy on Saturdays and
Sundays only. Selecting weekdays will apply the policy on Monday, Tuesday, Wednesday,
Thursday and Friday. Selecting individual days of the week will apply the policy only on
the selected day.
This value sets the starting time of day(s) that the overrides will be activated. Use the
spinner controls to select the hour and minute, in 12h time format. Then use the radio
button to choose AM or PM.
This value sets the ending time of day(s) the overrides will be disabled. Use the spinner
controls to select the hour and minute, in 12h time format. Then use the radio button to
choose AM or PM.
for both the 2.4 GHZ and 5.0 GHz radio bands:
Set a channel scan duration (from 20 - 150 milliseconds) access point radios use to
monitor devices within the network and, if necessary, perform self healing and neighbor
recovery to compensate for coverage area losses within a RF Domain. The default setting
is 50 milliseconds for both 2.4 GHz and 5.0 GHz bands.
Set the scan frequency using the drop-down menu. Set a scan frequency in either Seconds
(1 - 120) or Minutes (0 - 2). The default setting is 6 seconds for both 2.4 GHz and 5.0 GHz
bands.
Use the spinner control to set an extended scan frequency from 0 - 50. This is the
frequency radios scan channels on non-peer radios. The default setting is 5 for both 2.4
GHz and 5.0 GHz bands.
Use the spinner control to set a sample scan count value from 1 - 15. This is the number
of radio RF readings gathered before data is sent to the Smart RF master. The default
setting is 5 for both 2.4 GHz and 5.0 GHz bands.
Use the spinner control to set a client awareness count (1 - 255) during off channel scans
for either the 2.4 or 5.0 GHz radio. The default setting is 1 for both radio bands.
Select either the Dynamic, Strict or Disable radio button to define how power save
scanning is set for Smart RF. Strict disables smart monitoring as long as a power save
capable client is associated to a radio. Dynamic disables smart monitoring as long as
there is data buffered for a power save client at the radio. The default setting is Dynamic
for both 2.4 GHz and 5.0 GHz bands.
Select either Dynamic, Strict or Disable to define how voice aware recognition is set for
Smart RF. Strict disables smart monitoring as long as a voice client is associated to a radio.
Dynamic disables smart monitoring as long as there is data buffered for a voice client at
the radio. The default setting is Dynamic for both 2.4 GHz and 5.0 GHz bands.
tab displays by default. Use the Neighbor, Interference and Coverage Hole recovery tabs to define
Reset to revert to the last saved configuration.
6 - 87