Motorola WiNG 5.7.1 System Reference Manual page 831

Number of Interfering APs
Number of WIPS Events
5. Select the WIPS Report
6. Select Refresh to update the screen's statistics counters to their latest values.
Displays the number of devices exceeding the interference threshold in each listed RF
Domain. Each RF Domain utilizes a WIPS policy with a set interference threshold (from
-100 to -10 dBm). When a device exceeds this noise value, it is defined as an interfering
access point capable of disrupting the signal quality of other sanctioned devices
operating below an approved RSSI maximum value.
Lists the number of devices triggering a WIPS event within each listed RF Domain.Each
RF Domain utilizes a WIPS policy where excessive, MU and AP events can have their
individual values set for event generation. An administrator can enable or disable the
filtering of each listed event and set the thresholds required for the generation of the
event notification and filtering action.
button to launch a sub-screen to filter how WIPS reports are generated for the system.
Figure 13-9 System - WIPS Summary screen
13 - 15