Motorola WiNG 5.7.1 System Reference Manual page 510

6 - 40 WiNG 5.7.1 Access Point System Reference Guide
To configure WLAN accounting settings:
1. Select the Configuration
2. Select Wireless.
3. Select Wireless LANs
4. Select the Add
5. Select Accounting.
6. Set the following
Enable Syslog
Accounting
Syslog Host
Syslog Port
Proxy Mode
Format
tab from the Web UI.
to display a high level display of existing WLANs.
button to create an additional WLAN, or
Figure 6-19 WLAN - Accounting screen
Syslog Accounting information:
Select this option for the access point to generate accounting records in standard syslog
format (RFC 3164). The feature is disabled by default.
Specify the IP address (or hostname) of the external syslog host where accounting records
are routed. Use the drop-down menu to select the host type from Hostname or IP Address.
A valid hostname cannot contain an underscore.
Use the spinner control to set the destination UDP port of the external syslog host where
accounting records are routed. The default port is 514.
Use the drop-down menu to define how syslog accounting is conducted. Options include
None, Through Wireless Controller and Through RF Domain Manager. If no proxy is
needed, select None.
Select the format used to include (pack) the MAC address in a syslog request. Options
include No Delimiter (aabbccddeeff), Colon Delimiter (aa:bb:cc:dd:ee:ff), Dash Delimiter
(aa-bb-cc-dd-ee-ff), Dot Delimiter per four (aabb.ccdd.eef) and Middle Dash Delimiter
(aabbcc-ddeeff). The default setting is Dash Delimiter (aa-bb-cc-dd-ee-ff).
Edit to modify the properties of an existing WLAN.