Motorola WiNG 5.7.1 System Reference Manual page 501

Mark
Log
Enabled
Description
10. The Precedence column sets the priority of a IP Firewall rule within its rule set. Click on this column and drag the rule to
its appropriate place in the ruleset to set its precedence.
11. Select an existing Inbound IPv6 Firewall Rule
exist, select the Create icon to create a new firewall rule configuration. Select the
a selected firewall.
If creating a new rule, provide a name up to 32 characters.
12. Select the Add button.
IPv6 Firewall rule configurations can either be modified as a collective group of variables or selected and updated
individually as their filtering attributes require a more refined update.
13. Select the Edit Rule icon to the left of a particular IPv6 Firewall rule configuration to update its parameters collectively.
Select this option to mark certain fields inside a packet before allowing them. Mark is only
applicable for Allow rules. Mark sets the rule's 802.1p or dscp level (from 0 - 7)
Select this option to create a log entry that a firewall rule has allowed a packet to be
either denied or allowed.
Select this option to enable or disable this particular IP Firewall rule in this rule set.
Lists the administrator assigned description applied to the IP ACL rule. Select a
description within the table to modify its character string as filtering changes warrant.
Select the icon within the Description table header to launch a Select Columns screen
used to add or remove IP ACL criteria from the table.
or Outbound IPv6 Firewall Rule
Figure 6-14 WLAN Security - IPv6 Firewall Rules screen
using the drop-down menu. If no rules
Edit icon to modify the configuration of
6 - 31