Motorola WiNG 5.7.1 System Reference Manual page 610

7 - 32 WiNG 5.7.1 Access Point System Reference Guide
16. Set the following AAA TACACS
Authentication Access
Method
Directed Request
17. Set the following AAA TACACS
Authorization Access
Method
Allow Privileged
Commands
18. Set the following AAA TACACS
Accounting Access
Method
Authentication Failure
CLI Commands
Session
19. Select + Add Row
Service Name
Service Protocol
Authentication
Specify the connection method(s) for authentication requests.
• All – Authentication is performed for all types of access without prioritization.
• Console – Authentication is performed only for console access.
• Telnet – Authentication is performed only for access through Telnet.
• SSH – Authentication is performed only for access through SSH.
• Web – Authentication is performed only for access through the Web interface.
Select to enable the AAA TACACS authentication server to be used with the '@<server
name>' nomenclature. The specified server must be present in the list of defined
Authentication servers.
Authorization
Specify the connection methods for authorization requests:
• All – Authorization is performed for all types of access without prioritization.
• Console – Authorization is performed only for console access.
• Telnet – Authorization is performed only for access through Telnet.
• SSH – Authorization is performed only for access through SSH.
Select this option to enable privileged commands executed without command
authorization. Privileged commands are commands that can alter/change the
authorization server configuration.
Accounting server configuration parameters:
Specify access methods for accounting server connections.
• All – Accounting is performed for all types of access with none given priority.
• Console – Accounting is performed for console access only.
• Telnet – Accounting is performed only for access through Telnet.
• SSH – Accounting is performed only for access through SSH.
Select this option to enable accounting upon authentication failures. This setting is
disabled by default.
Select this option to enable accounting for CLI commands. This setting is disabled by
default.
Select this option to enable accounting for session start and session stop events. This
setting is disabled by default.
and set the following Service Protocol Settings
Provide a 30 character maximum shell service for user authorization.
Enter a protocol for user authentication using the service.
server configuration parameters:
server configuration parameters:
parameters: