Motorola WiNG 5.7.1 System Reference Manual page 892

13 - 76 WiNG 5.7.1 Access Point System Reference Guide
Secondary Next
Hop State
Default Next Hop
IP
Default Next Hop
State
Refresh
Displays whether the secondary hop is applied to incoming routed packets (UP/UNREACHABLE).
If a packet subjected to PBR does not have an explicit route to the destination, the configured
default next hop is used. This is either the IP address of the next hop or the outgoing interface. Only
one default next hop is available. The difference between the next hop and the default next-hop is
in case of former, PBR occurs first, then destination based routing. In case of the latter, the order
is reverse.
Displays whether the default hop is being applied to incoming routed packets.
Select the Refresh button to update the screen's statistics counters to their latest values.